Skip to content

Preparing for and Taking Microsoft Exam DP-200 (Implementing an Azure Data Solution)

Microsoft Certification Exam Badge for Exam DP-200.

On January 31st, 2019, Microsoft released two new Azure Data exams: Implementing an Azure Data Solution (DP-200) and Designing an Azure Data Solution (DP-201). If you pass both of these exams, you become a Microsoft Certified Azure Data Engineer Associate. On May 24th, 2019, I passed DP-200: Implementing an Azure Data Solution! Yay 🥳

In this post, I share how I prepared for the exam and what my experience was like on the day of the exam.

(I have later also written about Exam DP-201.)

Important Updates

I passed exam DP-200 in May 2019, and published this post based on that version of the exam.

As of August 31st, 2021, Exam DP-200 and DP-201 are retired and replaced by Exam DP-203: Data Engineering on Microsoft Azure.

You may still find the content in this post relevant, but make sure you reference the latest skills measured before you start studying.

Preparing for Microsoft Exam DP-200: Implementing an Azure Data Solution

When I started preparing for the DP-200 exam in February 2019, it had just been released. There were no courses, practice exams, or books available at that time. Instead, I relied heavily on Microsoft Learn and a lot of hands-on experience.

In short, this is how I prepared:

Below, you can find more details about how I prepared with links to all the resources I used.

(If you are simply looking for information about exam questions and answers, please leave. Sharing or using that kind of information is a violation of the Microsoft Exam Policy and Non-Disclosure Agreement.)

Skills Measured in Exam DP-200

Every time I study for a Microsoft exam, my first step is always to check the skills measured. It helps me understand the scope of the exam, as well as the products and technologies covered. It is basically a pre-written checklist.

The DP-200 exam skills measured is divided into main sections with several subsections and details. It tells you what you need to be able to do. For example, “configure elastic pools” or “design and implement data factory monitoring”. In addition to the official list of skills measured, I created my own checklist that lists the products and technologies covered in each section.

Microsoft Learning Paths for Azure Data Engineers

Once I had an understanding of the skills measured, I started on the Microsoft Learning Paths for Azure Data Engineers. Microsoft has done a great job making these learning paths engaging and easy to follow, and I enjoyed working through them.

The content is varied enough that studying doesn’t get boring. For example, there is a good mix of reading, watching videos, answering questions, and getting hands-on experience in sandbox environments.

Everything is gamified, meaning that you get experience points, badges, and trophies as you progress through the content and level up. If you don’t care about any of that, no problem! Just ignore it. But if you think it’s fun, it can add a little extra to your motivation 🌟

On the bottom of the DP-200 exam page, you will find a link to Guide to Training. It shows you the learning paths, the recommended order to work through them, the estimated time for each, and their recommended modules. All the links are clickable in the PDF, so this is a useful overview and starting point.

Microsoft Learning Paths for Exam DP-200

I worked through the following learning paths:

The estimated total time for all learning paths was a little over 43 hours. However, I ended up skipping and skimming some of the content because I already knew it or had previous hands-on experience. In total, I spent around 25 hours on the learning paths I completed.

Azure Solution Architectures

After completing the Microsoft Learning Paths, I reviewed the Azure Solution Architectures. The learning paths helped me understand the technologies and products individually. The solution architectures helped me understand how they work together.

I personally focused on the architectures where I don’t have as much hands-on experience. For example:

Depending on your background, you may want to spend more time on other architectures. You can find all the Azure Solution Architectures in the Azure Solutions portal.

SQLBits Session Recordings

I specifically call out SQLBits because they have high-quality content available for free 🧡 It is also one of the larger conferences with updated sessions and information from Microsoft, as well as from great community speakers.

Again, I personally focused on the topics where I don’t have as much hands-on experience. I also tried to watch as many of the Microsoft sessions as I could. For example:

Just like with the solution architectures, you may want to watch other videos than me. You can find all the recordings on the SQLBits Previous Sessions page.

You may also want to review the session recordings from Microsoft Ignite.

Taking Microsoft Exam DP-200: Implementing an Azure Data Solution

The first step of taking the exam is to accept and sign a Non-Disclosure Agreement (NDA). Because of that, I can’t say anything about the exam itself. Instead, I want to share some of my tips and advice, based on my own experiences.

You can find more information in Microsoft’s Certification Exam Policies and FAQs.

Exam Time

I had a total of 210 minutes for the exam. 180 minutes were for answering questions. The remaining 30 minutes were for reading instructions, signing the NDA, and providing feedback afterwards.

During the exam, you will see a big timer on the screen that shows how much time you have left. You will also see how many total questions you have to answer. Make sure you have enough time for all questions. According to Microsoft, exams usually have 40-60 questions. For a 180-minute exam, that means you have 3-5 minutes per question.

If you feel stuck on a question, I recommend that you mark it for review and return to it later. It’s better to get that one question wrong than not having time to answer the last five questions.

Question Types

The question types can include case studies, repeated answer choices, single choice, multiple choice, drop-down lists, build lists, drag-and-drop, and more.

Question Text

My tip is to read all questions bottom-up or from the end. Start by identifying the actual question, then look at the answer alternatives. Finally, work your way through the entire question text and all background information to find keywords, hints, and information to support the answer you think is correct.

The reason I share this tip is that you often get presented with a lot of background information, especially in the case studies. They usually describe all parts of a larger solution. By identifying the question first, you can focus in on the relevant content while reading.

Help! I don’t know the answer!

Even after all your hours of preparation, you might come across a question that takes you by surprise. I got a couple of these questions. My best advice is to use the elimination method to narrow down the options to the most likely answer. If that doesn’t help… take your best guess 😅 You will not be penalized for wrong answers. You simply don’t earn some or all of the possible points.

Pick the answer that sounds most likely or logical, and move on to the next question. Remember that you don’t need 100% to pass the exam, so don’t worry too much about a single question.

Don’t overthink!

Finally, don’t overthink it. There are no “it depends” answers in the Microsoft certification exam world. Even though I wish I could add “yes, but, if…” to many of my answers, you can’t. You need to go in with a mindset that there is either a right answer, or a best answer.

Read the text and stay as objective as possible. Use the facts in the question to make your decision, and don’t fall into the “it depends” trap. If you’re unsure, pick the best answer. Again, don’t get stuck on any questions. Go back and review them at the end. You may even answer some other questions in the meantime that may trigger your memory.

Summary

In this post, I shared all the resources that I found and used.

If you are reading this after May 2019, your very first stop should be the official exam overview page. Always check the latest official information from Microsoft before your exam.

In total, I spent somewhere between 50-75 hours preparing for the DP-200 exam. That does not include the time spent getting hands-on experience working on real projects.

My key takeaway and final piece of advice is to work through the entire list of skills measured. Know how to do everything in the Azure Portal, and familiarize yourself with how to do everything by writing code. This will help prepare you for the exam, but you will also be confident that you have the skills needed to implement Azure Data Solutions in the real world.

Good luck! You can do this 🙌🏻

Share or Comment?

About the Author

Professional headshot of Cathrine Wilhelmsen.Cathrine Wilhelmsen is a Microsoft Data Platform MVP, BimlHero Certified Expert, international speaker, author, blogger, and chronic volunteer. She loves data and coding, as well as teaching and sharing knowledge - oh, and sci-fi, chocolate, coffee, and cats 🤓